Specifications; Troubleshooting - Atlas AH Series Owner's Manual

AH Series Stadium Subwoofer

SPECIFICATIONS

MODEL
AHSUB15-BSG 250 Watts RMS

TROUBLESHOOTING

PROBLEM
There is no sound
Low sound level
Sound cuts in and out
Distortion at increased levels
Speaker makes "buzzing" noise
Call Atlas Sound tech support at 1-800-876-3333 with any additional questions.
AtlasSound.com
POWER FREQUENCY SOUND LEVEL
RATING RES. ±5dB
RP/1M
RMS
55Hz to 120Hz 127dB
POSSIBLE CAUSE
Power off. Equipment setting is wrong.
Volume set too low.
Loose connection.
Setting/volume control is set too low.
Connection is shorted or bad.
System overload/oscillation intermittent connection.
Amplifier/speaker overdriven.
Hardware loose or speaker damaged.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Specifications are subject to change without notice.
DISPERSION IMPEDANCE
1W/1M
103dB Omni 8 Ohms
Assure that power is applied to all equipment in system. Check
that routing (input/output) controls are set correctly. Check that
volume level is above minimum.
Check system from start to finish for crossed wires, loose
connection, etc. On the AH location check for correct connection.
Check volume levels or amplifiers and related equipment
(equalizer). Check that connections aren't partially shorted/
corroded.
Check for overload condition or bad connection.
Check that power to speaker isn't over limits. Check that amplifier
isn't overdriven. Reduce power to amplifier slightly.
Make sure speaker grille is tight. Check other hardware
connections. Check speakers for loose parts or speaker damage.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 9 –
Owner's Manual
DIMENSIONS WEIGHT
30.56"H (776mm) 181 lbs (82.1kg)
30"W (762mm)
28.1"D (714mm)
REMEDY