Speaker Cable Recommendations And Connection - Atlas AH Series Owner's Manual

AH Series Stadium Subwoofer Owner's Manual
SPEAKER CABLE RECOMMENDATIONS AND CONNECTION INSTRUCTIONS
Wire Gauges
For very short distance speaker cable runs (less than 25') #16-gauge, stranded, twisted pair speaker
cable may be used. For speaker cable runs between 25' and 75', #14-gauge, stranded, twisted pair
speaker cable is recommended. For speaker cable runs greater than 75', #12-gauge, stranded, twisted
pair speaker cable is necessary. For runs exceeding 150', please contact tech support for proper wire
gauge.
Input connections are provided on a convenient recessed terminal block located on the bottom of the
loudspeaker. This terminal block includes a clear weather resistant cover which should be re-installed
after terminating the speaker cabling to prevent corrosion in outdoor applications.
Allow an adequate service loop for this connection to allow tilt of the loudspeaker. If the speaker is tilted
above parallel to the ground, water may collect in the speaker cabinet causing damage — the product
should not be installed tilted upwards!
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com – 7 –
Specifications are subject to change without notice.