Operation; Controls And Indicators; Hardware Controls - BKI MDW series Operation Manual

Multi-Deck Warmer

Controls and Indicators

Hardware Controls

Item # Description
1 Main Power Switch
2 Lights Circuit Breaker
3 Thermostat for Base
Warmer (Bottom
Shelf)
4 Thermostat for
Individual Shelf
SS-OM-002.03

Operation

4
SHELF THERMOSTAT
SOLID BACK UNITS -
ACCESS FROM FRONT
PASS-THRU UNITS -
ACCESS FROM BACK
POWER
OFF
1
POWER & LIGHT SWITCH PLATE
SOLID BACK UNITS - LOCATED ON FRONT
PASS-THRU UNITS - LOCATED ON BACK
Figure 1
Function
Turns power On or Off to the entire unit. When placed in the On position, the
shelf heaters are powered and the lights illuminate. When placed in the Off
position, power is removed from the entire unit.
Provides circuit protection for the Lights. When placed in the On position
(with the Power Switch in the On position) the illuminate. When placed in
the Off position (with the Power Switch in the On position) power is removed
from lights. If an overload occurs in the light circuit, the Circuit Breaker will
trip causing the actuator to move to the Off position.
Controls the surface temperature of the Base Warmer (Bottom Shelf). Set
the Thermostat dial to a larger number setting to increase the temperature or
a lower number setting to decrease the temperature.
Controls the surface temperature of the individual Shelf. Set the Thermostat
dial to a larger number setting to increase the temperature or a lower
number setting to decrease the temperature.
LIGHTS
ON OFF ON
2 3
5
Revised 10/16/18