Ground Connection
The ground connection for the SonicWave 231o is located on the back of the device.
to earth cable to the grounding terminal.
To attach the green ground to earth cable to the grounding terminal:
1
Use the ground screw assembly with the star washer to attach the ground wire's ring terminal to the
SonicWave 231o. The wire should be as close to the SonicWave bottom as possible.
2
Tighten the screw securely.
IMPORTANT:
This device must be professionally installed using either the supplied antennas or with
approved alternate antennas available from SonicWall.
Attach the green ground
Safety and Regulatory Information
3