Additional 2-Way Lcd Remote Control Functions - Prestige PE2LCDZ Owner's Manual

Additional 2-Way LCD Remote Control Functions

Additional Features of the Optional 2 Way LCD Remote Control
Display Illumination
Press and hold the
Melody / Vibration Mode
To have the remote control vibrate or play a melody tone each time it receives a
response from the vehicle press and hold
Battery Save Mode
While in POWER SAVE MODE the 2-way LCD transmitter will NOT look for any
incoming signals from the main unit until a button is pressed. The LCD screen will
display to indicate that power save mode is ON. To enter power save mode press
and hold then press .
F
Stopping LCD Trigger Melody
To stop the alarm trigger melody if the system has been triggered WITHOUT
disarming the system, press
the vehicle at this time and the alarm will silence.
Parking Meter Countdown
The parking meter countdown timer has 6 preset times, to access the preset times
and begin countdown press and release
each additional press of
2 Car Mode
To control a second security system enter 2 car mode by pressing
together for 3 seconds. When the
will control the second security system. Use the same method to exit 2 car mode and
resume control of the original vehicle's security system.
NOTE: A second security system must be installed and the LCD transmitter must be
learned to it before this feature will operate the additional system.
Parking Meter Countdown Timer
The LCD remote is equipt with a Parking Meter Countdown Timer. This timer is
activaed by pressing and holding the
press this combination the timer will increase 10min.
12
button for 1 second. The display will illuminate for 5 seconds.
F
button one time only, this will send a lock command to
will increase the countdown time.
icon appears on the transmitter's LCD screen it
then press and release .
F
then press and hold
, then pressing the
F
for 2 seconds,
& and
OPT
button. Each time you
APSRS LCDZ Owners revA