Advertisement
Quick Links
TM
i ¸
C
R
O
S
S
TR
A
ININ
G
S
Y
TE
M
SE_/AJRS
Model No. 831.159231
Serial No.
The serial number can be found in the
IotaS'onshown below. Write the serial
number in the space above,
Serial Number
Decal
CAUTIONh
Read all safety
precautions and
instructions in this
owner's manual before
using this equipment.
Save this owner's
manual in a safe place
for future reference.
PATENT PENDING
0 WNER 'S MAN UA L
SEARS,
ROEBUCK
AND CO., NOFFMAN
ESTATES,
IL 60179
Advertisement
Related Manuals for Sears 831.159231
Summary of Contents for Sears 831.159231
- Page 1 SE_/AJRS Model No. 831.159231 Serial No. The serial number can be found in the IotaS'onshown below. Write the serial number in the space above, Serial Number Decal CAUTIONh Read all safety precautions and instructions in this owner's manual before using this equipment.
- Page 2 Important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using this equipment. SEARS assumes no responsibility •for personal injury or property damage sustained by or through the use of this equipment.
- Page 3 BEFORE YOU BEGIN Congratulations for seiecting the SEARS unique LIFESTYLER SYSTEM 50 ERS is a total body conditioning traihing and aerobic exercises. M0v_ng from station to station on the LIFESTYLER quick and easy, and the digital hand control allows you to change weight with the touch of a button.
- Page 4 ASSEMBLY Place all parts in a cleared area and remove materials until assembly is completed. CHART accompanying this manual list of the tools needed. The assistance Press the four 2" x 2" Outer Caps (13) onto the Stabilizer (2). Turn the Stabilizer bracket is on top.
- Page 5 Press four Large Bushings (15) into the Support Arm (671. Tap a 1/2" Dome Cap (24) onto one end of the 9 1/4" Axle (71). Liberally grease the Axle, Turn the Support Arm(67) so the decal is away from the Frame (1):, Insert the 9 1;_4"Axle through Frame as Shown, Tap a 1/2"...
- Page 6 Press a 1 1/2" x 1 1/2" Inner Cap (19) into the Ab Arm (21). Wet the upper end of the Ab Arm and the inside of the Ab Arm Pad (25) with soapy water. Slide the Pad onto the Ab Arm. Tap a 1/2"...
- Page 7 15. Separate the ends of the Conirol the Plastic Sleeve (30) onto one end. Bring the ends tOgether and _enter the Plastic Sleeve Plug one end of the Control Cord (27) into the Hand Control (28). Plug the other end of the Cord into the Wire Adapter (74) at the front of the system.
- Page 8 USING THE STEPPER The stepper features precision resistance nature of resistance cylinders, it is recommended case of slight oil leakage. WARNING: the cylinders to cool before touching The resistance of the stepper pedals can be changed moving the resistance brackets. one pedal at a time.
- Page 9 OPERATING THE BUTTERFLY To operate the butterfly arms in the press arm mode, insert the Pull Pins (68) into the support arms as described in assembly step 6 on page 5. To operate the butterfly arms in the butterfly mode, remove the Pull Pins from the support arm and the butterfly Insert one Pull Pin into the frame extension support arm.
- Page 10 • 2 . Gas Shock 105142 012082 1O9875 105315 Note: "#" indicates a non-ittust!ated back cover of this manual for information No. 831.159231 Description Frame Stabilizer Ab Frame Seat Support Pulley 3/8" Nylock Nut 1/4" Lock Washer 1/4" x 3/4" Bolt 3/4"...
- Page 11 EXPLODED DRAWING--Model No. 831.159231 Rev. 3193 "O-14...
- Page 12 10 of this manual. The DESCRIPTION of the part(s), from page 10 of this manual. Your Sears merchandise has added value when you consider that Sears has service units nationwide, staffed with Sears trained technicians and equipment to ensure that we meet our pledge to you: "We service...