Table of Contents
Advertisement
SCH-670 (46-73)
11/23/98 3:30 PM
Backlight: When you turn on your phone, the LCD display and
keypad light up. You can choose from Automatic or Always
OFF. In Automatic mode, the light goes off automatically 8
seconds after the last button is pressed. If you choose Always
OFF mode, the light is always off.
Call Time Display: If this feature is activated (ON mode), the call
time counter is automatically displayed when the phone is
connected to the system. You can check the call time during
telephone conversation. In OFF mode, you must activate the call
time display manually by pressing FCN and numeric button 2 while
you are over the phone. To turn off the feature, press FCN and 2
again.
The call charge starts to count when the call is actually
connected.
Present Time Display: If this feature is activated (ON mode), the
current time is displayed. In OFF mode, the current time is not
displayed.
Release Tone: When this feature is activated (YES mode), the
phone sounds a release tone when a call is released. In NO mode,
the phone does not generate a release tone. See page 46.
Connect Tone: When this feature is activated (YES mode), the
phone makes a connection tone when your phone is connected to
the basestation system to make a call. In NO mode, the phone
does not generate a connection tone. See page 47.
68
Page 24
Changing Greeting Message
This feature allows you to change the greeting
message displayed when you turn on the phone.
1. Press:
2. Enter the lock code.
3. Press numeric button 1 to choose
'Greeting' function.
4. Enter new greeting message with the
number button marked with the
desired letter.
5. Press STO.
FCN
followed by
Numeric button 0
The lock code is preset to 0000.
An asterisk ( ) is displayed for
each digit entered.
• You can enter the greeting
message up to 12 digits.
• Refer to page 28 for entering
letter with the number button.
69
Advertisement
Table of Contents
