Table of Contents
Advertisement
SCH-670 (46-73)
11/23/98 3:30 PM
6. Press STO.
To Release Alarm
1. Press:
FCN
followed by
Numeric buttons 3 and 2.
2. Press numeric button 2 to choose
'Release'.
3. Press
4. Press STO.
If you turn the phone off, then on when alarm is set:
If the alarm time is appointed...
At the current time mode
Using time duration (in minute) mode
56
Page 12
• The phone will beep and the
message -ALARM- will be
displayed at the appointed time.
• To stop a beep tone, open/ close
the cover, or press any button.
Otherwise the beep tone will
stop automatically after 3
minutes.
or
to choose YES.
Alarm setup...
Remains to be on.
Cancels.
DTMF Dialing
This feature allows you to utilize additional phone
services, such as accessing an alternate long
distance network, signaling pager, or banking by
phone. The following two features will make it
easier to send DTMF tone.
If 'SILENT' is displayed, turn on the keytone. See 'Turning
Tones On and Off' on page 45.
Using Memory
If you want to use this feature, store the numbers
(ID code, credit card number, etc) in a memory
location.
1. After you call the service, press RCL
when the service asks to enter the
DTMF code.
2. Enter the location number to be
dialed.
Example:
Credit card number
Password
Result: The number stored in the
location is displayed.
3. Press:
FCN
followed by
SEND
57
Advertisement
Table of Contents
