Related Manuals for Pentair NRG-DM
Summary of Contents for Pentair NRG-DM
- Page 1 NRG-DM Software version 1.60 CZ – DA – DE – EN – ES – ET – FI – FR – HU – IT – LT – LV – NL – NO – PL – RU – SV pentairthermal.com/manuals/ THERMAL BUILDING SOLUTIONS...
- Page 2 Figure 1 Figure 2...
-
Page 3: Table Of Contents
1 CONTENT Content Description Navigation principle Getting started Navigation structure Working modes 6.1 Event Mode (weekly schedule mode) 6.2 Constant Mode (single temperature mode) 6.3 Boost Mode (temporary override mode) Changing/Consulting settings 7.1 Event settings (programming a weekly schedule) 11 7.2 User settings 7.2.1 Time and date 7.2.2 Child lock... - Page 4 Trouble shooting Technical specification Approvals and declarations Attention: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
-
Page 5: Description
Floor sensing mode / Room sensing mode with floor limiter / No sensor mode) depending on your needs. The NRG-DM will switch on and off your floor heating in order to obtain the set-temperature. When the NRG-DM is switching on the electrical floor heating, the symbol ( ) is visible on the display. -
Page 6: Navigation Principle
3 NAVIGATION PRINCIPLE The NRG-DM is a thermostat with a big and clear display of 1.8’’. On/OFF switch Day and time Working Mode Heating Symbol Display temperature 3 Commands 3 Buttons Figure 3 Use the button (7) in order to execute the command (6). -
Page 7: Getting Started
4 GETTING STARTED When you power up the NRG-DM for the first time, you will be asked to follow a set-up wizard with 4 simple questions. 1. Select Language 2. Confirm Time Figure 4 Figure 5 3. Confirm Date 4. Select Sensor... -
Page 8: Navigation Structure
5 NAVIGATION STRUCTURE In the NRG-DM, it is very easy to navigate in the Menu structure to activate working modes or to change settings. Standby Direct access to BOOST is only active in Event Mode using the + and - button... -
Page 9: Working Modes
(single temperature mode) The Constant Mode is a simple working mode where the NRG-DM is aiming for 1 temperature only. In this mode, you can choose the temperature by using the + & - buttons. Remark: You can temporarily step away from the Constant... -
Page 10: Boost Mode (Temporary Override Mode)
Boost Mode. SELECT DAY(S) Constant Mode When activating the Boost Mode, the NRG-DM will ask you Mon-Fri Event Mode to confirm the requested temperature and duration of the... -
Page 11: Changing/Consulting Settings
Note: If you are running in Event Mode, you can activate the Boost Mode by pressing on the + or – button directly. Figure 13 7 CHANGING/CONSULTING SETTINGS 7.1 EVENT SETTINGS (programming a weekly schedule) The Event settings are used in order to program or adapt a weekly schedule used in the Event Mode. -
Page 12: User Settings
23.0°C SELECT SELECT Menu Mon-Fri 00:00 07:00 23.0°C Event settings Event Mode Sat-Sun Boost Mode Menu SELECT • Temperature = xx.x °C Mon-Fri, Period 1 SELECT SELECT Menu Engineering Mode From 23.0°C User settings Mon-Fri, Period 1 MONDAY 11:40 00:00 07:00 Event settings Mon-Fri, Period 1... -
Page 13: Child Lock
Constant Mode 23.0°C 23.0°C Event Mode Boost Mode 7.2.2 CHILD LOCK By activating the child lock, the NRG-DM will go to the SELECT Menu home screen and a lock sign will appear on the screen. MONDAY 14:00 Event Mode 23.0°C... -
Page 14: Energy Monitoring
23.0°C 23.0°C 7.2.4 ENERGY MONITORING You can display some statistics of the use of the NRG-DM. Menu In order to be able to do this, the currency, the load and the cost of energy need to be filled in. In the energy monitoring... -
Page 15: Adaptive Function
100% accurate. 7.3.2 ADAPTIVE FUNCTION Thanks to the adaptive function, the NRG-DM will know when to switch your heating on, in order to obtain the desired temperature at the desired time. The Adaptive function is only active in the Event Mode and is activated from factory. -
Page 16: Temperature Scale
7.3.6 SENSOR In the Sensor setting, you select the type of sensor that is installed. The possible sensors are: • Factory = sensor delivered with the NRG-DM = 12kΩ sensor • NRG-Temp = sensor of the NRG-Temp or Green Leaf thermostat = 10kΩ... -
Page 17: Language
7.3.7 LANGUAGE The NRG-DM is translated in to 11 languages. In this menu you can choose to use the following languages for the firmware: Czech, Dutch, English, Finnish, French, German, Lithuanian, Norwegian, Polish, Russian or Swedish. 7.3.8 FACTORY RESET If you need to reset all the settings to the factory settings, you can use the factory reset. - Page 18 9 TECHNICAL SPECIFICATION Supply voltage 230VAC +/- 10%, 50Hz Power consumption in 400 mW Sleep mode Power consumption in 1000 mW Max. load Main power switch 2-pole Relay output 230V, max. 13A Setpoint range 0°C to 40°C Ambient temperature -20°C to +70°C –...
- Page 19 Temperature regulation PWM (pulse with modulation method method) with PI control loop Accuracy – floor/room 0.2°C in the range 0°C to +40°C sensor Back-up for set values In non-volatile memory Back-up for time 5 years storage or 10 years with and date 50% power on Type of action...
- Page 20 Tel. +47 66 81 79 90 Fax +47 66 80 83 92 salesno@pentair.com WWW.PENTAIRTHERMAL.COM All Pentair trademarks and logos are owned by Pentair or its global affiliates. Pentair reserves the right to change specifications without prior notice. © 2015 Pentair. EN-NRGDM-IM-EU0381...