Table of Contents
Advertisement
− In this case, use a water backflow preventer or a supply hose
set approved in accordance with IEC 61770.
The following work steps are required to prepare the device for operation:
1. Fit the handle
2 enclosed cross-slotted screws
Figure 1
2. Attach the holder for the spray gun
on the 2.2 kW high pressure washer up to the stop point (see fig. 2).
3. Remove the protective cap
screw the high pressure hose
Figure 3
4. Fit the turbo lance
spray gun and turn the spray lance clockwise by 90° to lock it in this position
(see fig. 4).
5. Remove the protective cap
2.2 kW pressure washer and screw the water inlet adapter
socket until hand tight (see fig. 5).
Figure 5
6. Connect the supply hose with a quick-lock coupling (not included in the product
contents) with the water inlet adapter on the 2.2 kW high pressure washer
(see fig. 6).
AFTER SALES SUPPORT
01904727501
019022605
GB
IRE
1
on the 2.2 kW high pressure washer
19
18
from the threaded socket of the spray gun
3
13
or the adjustable spray lance
9
from the threaded socket
(see fig. 1).
Figure 2
and the cord holder
11
tightly onto the spray gun (see fig. 3).
Figure 4
Figure 6
6
. Secure it with the
to the receptacles
4
14
in the connection for the
8
of the
21
onto the threaded
www.coreservice.co.uk
GB
IRE
First use
15
and
15
Hide quick links:
Advertisement
Table of Contents
