Dell TrueMobile 1400 User Manual page 36

Using the TrueMobile 1400 Client Utility: Dell TrueMobile 1400 WLAN Card User's Guide
Viewing or modifying the wireless network properties
To view or modify the wireless network properties (Windows 2000 environment)
1. Open the TrueMobile 1400 wireless utility.
a. From the desktop, click the Start button, point to Settings, and click Control Panel.
b. Double-click the TrueMobile 1400 Client Utility icon
2. If it is not already on top, click the Wireless Networks tab.
3. Select the network from the Preferred networks list and click Properties.
file:///D|/My%20Documents/1400/utility.htm (8 of 33) [11/15/2002 9:07:53 AM]
Three vertical green bars indicate that the signal is good.
Three vertical yellow bars indicate that the signal strength is low.
Suggested action: Move closer to the access point.
Two red vertical red bars indicates that the signal strength is very low.
Suggested action: Move closer to the access point.
Uncolored vertical bars indicate that there is no signal being received.
Probable causes:
The computer is trying to establish an initial connection but has not yet succeeded.
You may have moved out of range of the access point.
Suggested action:
Wait
Move closer to the access point.
Uncolored vertical bars with a superimposed red letter x indicate that there is no radio connection.
Probable cause: The radio is disabled.
Suggested action: Enable the radio. To enable the radio, right-click the Dell TrueMobile 1400 Internal
Dual-band WLAN Utility icon and click Enable Radio.
.