Dell S2719DC User Manual page 13

Power management modes
If you have VESA's DPM-compliant video card or software installed on your computer, the
monitor can automatically reduce its power consumption when not in use. This is referred
to as power save mode
input devices, the monitor automatically resumes functioning. The following table shows the
power consumption and signaling of this automatic power saving feature.
VESA mode Horizontal
sync
Normal Active
operation
Active-off Inactive
mode
Switch off -
Energy Star
P
ON
E
TEC
The OSD operates only in the normal operation mode. If you press any button in the active-
off mode, one of the following message is displayed.
1 Zero power consumption in OFF mode can only be achieved by disconnecting
the power cable from the monitor.
2 Adapter output maximum power consumption with maximum luminance.
3 Power consumption of on mode as defined in Energy Star 7.0 version.
4 Total energy consumption in kWh as defined in Energy Star 7.0 version.
This document is informational only and reflects laboratory performance. Your product
might perform differently, depending on the software, components, and peripherals you
ordered and shall have no obligation to update such information. Accordingly, you should not
rely upon this information in making decisions about electrical tolerances or otherwise. No
warranty as to accuracy or completeness is expressed or implied.
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR® compliant as defined in the program
requirements product specification for displays version 7.1.
. If the computer detects input from the keyboard, mouse, or other
1
Vertical Video Power indicator
sync
Active Active White
Inactive Off
- -
White
(Glowing)
Off
Power consumption
21.46 W 3
68.59 kWh
4
About your monitor
Power consumption
130 W (maximum)
2
35 W (typical)
Less than 0.5 W
Less than 0.3 W
| 13