1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Chainsaw
  5. C944.414460
  6. Instruction manual

Craftsman C944.414460 Instruction Manual

46cc/2.8 cu.in. 2-cycle gasoline chain saw
Hide thumbs Also See for C944.414460:
Table of Contents

Advertisement

Quick Links

Enlarged version

Instruction Manual

46cc/2.8 cu.in. 2-Cycle
GASOLINE CHAIN SAW
Model No.
C944.414460 --- 18 in. Bar
S S S S Safety
S S S S Assembly
S S S S Operation
S S S S Maintenance
S S S S Parts List
WARNING:
Read and follow all Safety Rules and Operating
Instructions before first use of this product.
Sears Canada, Inc., Toronto, Ontario M5B 2B8
530164939
3/12/04

Advertisement

Table of Contents
loading

Related Manuals for Craftsman C944.414460

Summary of Contents for Craftsman C944.414460

  • Page 1: Instruction Manual

    S S S S Operation S S S S Maintenance S S S S Parts List WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product. Sears Canada, Inc., Toronto, Ontario M5B 2B8 530164939 3/12/04...

  • Page 2: Warranty Statement

    WARRANTY STATEMENT LIMITED ONE (1) YEAR WARRANTY FOR CRAFTSMAN For one (1) year from the date of purchase Sears Canada, Inc., will repair or replace free of charge at Sears option parts which are defective as a result of materials or workmanship.

  • Page 3: Safety Rules

    SAFETY RULES WARNING: Always disconnect spark plug wire when making repairs ex- cept for carburetor adjustments. Be- cause a chain saw is a high-speed woodcutting tool, special safety precau- tions must be observed to reduce risk of accidents. Careless or improper use of this tool can cause serious injury.

  • Page 4: Guard Against Kickback

    A guard or other part that is damaged should be properly repaired or replaced by a Sears Service Centre unless otherwise indicated elsewhere in the instruction manual. S When not in use, chain saws should be stored in a dry, high or locked-up place out of the reach of children.

  • Page 5: Maintain Control

    increase the chance of kickback. Follow manufacturer’s chain sharp- ening and maintenance instructions. Check tension at regular intervals, but never with engine running. Make sure chain brake nuts are securely tightened. S Begin and continue cutting at full speed. If the chain is moving at a slower speed, there is greater chance of kickback occurring.
  • Page 6 Repairs on a chain brake should be made by an authorized Sears Service Centre. Take your unit to the place of purchase or to your nearest Sears Ser- vice Centre. Computed kickback angle (CKA) Table MODEL Length C944.414460...

  • Page 7: Carton Contents

    CARTON CONTENTS Check carton contents against the fol- lowing list. Model C944.414460 S Chain Saw (fully assembled) S Chain adjustment tool (bar tool) S 2-cycle engine oil (bar oil not included) S Carrying case Examine parts for damage.
  • Page 8 If you do not understand the fuel handling information do not at- tempt to fuel your unit. Seek help from someone that does understand the in- formation or contact your Sears Ser- vice Centre. GUIDE BAR AND CHAIN OIL The chain oiler provides continuous lubrication to the chain and guide bar.
  • Page 9 Never use engine or carburetor clean- er products in the fuel tank or perma- nent damage may occur. See the section for addition- STORAGE al information. CHAIN BRAKE Ensure chain brake is disengaged by pulling the front hand guard back to- ward the front handle as far as pos- sible.

  • Page 10: Operating Tips

    0.020 inch (0.5 mm) thick. Repairs on a chain brake should be made by your Sears Service Centre. Take your unit to the place of pur- chase or to the nearest Sears Service Centre.

  • Page 11: Felling Large Trees

    S The chain saw operator should keep on the uphill side of the terrain as the tree is likely to roll or slide downhill after it is felled. S Study the natural conditions that can cause the tree to fall in a particular direction.

  • Page 12: Important Points

    IMPORTANT POINTS S Cut only one log at a time. S Cut shattered wood very carefully; sharp pieces of wood could be flung toward operator. S Use a sawhorse to cut small logs. Never allow another person to hold the log while cutting and never hold the log with your leg or foot.

  • Page 13: Limbing And Pruning

    LIMBING AND PRUNING WARNING: Be alert for and guard against kickback. Do not allow the moving chain to contact any other branches or objects at the nose of the guide bar when limbing or pruning. Al- lowing such contact can result in seri- ous injury.

  • Page 14: Maintenance

    CHECK FOR DAMAGED OR WORN PARTS Contact your Sears Service Centre for replacement of damaged or worn parts. NOTE: It is normal for a small amount of oil to appear under the saw after en- gine stops.
  • Page 15 1. Use the screwdriver end of the chain adjustment tool (bar tool) to move chain around guide bar to ensure kinks do not exist. The chain should rotate freely. Guide Chain Adjustment Chain Brake Tool Nuts Adjusting (Bar Tool) Screw 2.
  • Page 16 LUBRICATION Bar Oil Fill Cap S See GUIDE BAR AND CHAIN OIL der the section. OPERATION INSPECT AND CLEAN UNIT AND DECALS S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild detergent.

  • Page 17: Service And Adjustments

    CHAIN SHARPENING Chain sharpening requires special tools. You can purchase sharpening tools at Sears or go to a professional chain sharpener. CHAIN REPLACEMENT WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving.
  • Page 18 T. S Turn idle screw (T) clockwise to in- crease engine speed. S Turn idle screw (T) counterclockwise to decrease engine speed. If you require further assistance or are unsure about performing this proce- dure, contact your Sears Service Centre.

  • Page 19: Seasonal Storage

    Craftsman 40:1, 2-cycle engine oil (air cooled) is especially blended with fuel stabilizer. If you do not use this Sears oil, you can add a fuel stabilizer to your fuel tank. ENGINE S Remove spark plug and pour 1 tea-...
  • Page 20 5. Check for dirty fuel filter; replace. Check for kinked or split fuel line; repair or replace. 6. Contact Sears Service (see back cover). 7. Contact Sears Service (see back cover). 1. See “Carburetor Adjustment” in the Service and Adjustments Section.
  • Page 21 2. Chain dull on one side. 3. Guide bar bent or worn. If situations occur which are not covered in this manual, use care and good judgement. If you need assistance, contact your Sears Service Centre. REMEDY 1. Fill oil tank.
  • Page 22 EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OB- LIGATIONS: The U. S. Environmental Protection Agency/Environment Cana- da and Sears Canada, Inc., are pleased to explain the emissions the emissions control system warranty on your year 2002--2004 small off--road en- gine.
  • Page 23 Sears Canada service centres. Call 1-800-469-4663. MAINTE- NANCE, REPLACEMENT AND RE- PAIR OF EMISSION RELATED PARTS: Any Sears Canada approved replacement part used in the perfor- mance of any warranty maintenance or repair on emission related parts will be provided without charge to the owner if The information on the product label indicates which standard your engine is certified.

Table of Contents