The Functions In The "Tag Editor" Menu - Siemens SIMATIC RF650M Operating Instructions Manual

Mobile reader

Hide thumbs Also See for SIMATIC RF650M:

Table of Contents

"RF650M" software

6.4 The functions in the "Tag Editor" menu

6.4

The functions in the "Tag Editor" menu

In the "Tag Editor" menu, you can read data from a target transponder, change this and write

to the target transponder. you can protect memory areas and assign access and kill

passwords.

Target

In the "Target" tab, you can scan the antenna field of the RF650M for transponders and

select a target transponder from the transponder list. All the functions/setting described in

the following tabs only affect the target transponder selected here.

Figure 6-5

Table 6- 4

Characteristic

RSSI

EPC ID

ACCESS PWD

Scan

Select a target transponder from the transponder list to edit this with the tabs described

below.

"Target" tab in the "Tag Editor" menu

Properties of the "Target" tab

Description

Last measured RSSI value of the transponder.

EPC ID of the identified transponder

Check box and input box for the access password to allow access to a tran-

sponder already protected by an access password.

Runs a scan. All identified transponders are displayed in the transponder list.

SIMATIC RF650M mobile reader

Operating Instructions, 04/2015, C79000-G8976-C404-01

Table of Contents