Listening To Bluetooth Music - Sangean WR-16 Operating Instructions Manual

Operating your radio AM
1.
Connecting the antenna
The radio comes with a built-in AM antenna which should be enough for normal listening. To improve
the AM reception, you may connect an outdoor AM antenna (not included) to the AM antenna terminal
(USA version only).
2.
Turn on your radio by switching the Power knob to the AM position.
3.
Rotate the Tuning Control knob to select the desired station. On AM, the tuning scale is marked
in kHz (Kilohertz). The tuning LED will appear brightest when best tuning has been achieved.
4.
Rotate your radio for best reception.
5.
Adjust the Volume Control knob for comfortable listening.
6.
To switch off your radio, turn the power knob to the OFF position.

Listening to Bluetooth music

You need to pair your Bluetooth device with your radio before you can auto-link to play / stream Blue-
tooth music through your WR-16. Paring creates a 'bond' so two devices can recognize each other.
Pairing your Bluetooth device for the first time
1.
Rotate the Band selecting knob to select the Bluetooth function.
The Bluetooth icon on the panel will flash blue.
2.
Activate Bluetooth on your device according to the device's user manual to link to your WR-16.
Some smartphones that are equipped with earlier Bluetooth versions older than BT2.1 may
need to input the pass code "0000".
3.
Once connected, there will be a beep sound and the Bluetooth icon will remain illuminated
blue. You can now play the music from your Bluetooth-enabled device to the WR-16.
08