Advertisement
LGIC
9.2 Pref Mode [ Menu + 0 + 000000 + 2 ]
* Select the one of CDMA only , ANALOG pref, ANALOG olnly and CDMA pref using NEXT
soft_key2 and press OK soft_key1 for storing
9.3 ER Mode [ Menu + 0 + 000000 + 3 ]
* Please see your service provider for details and availability .
9.4 PRL [ Menu + 0 + 000000 + 4 ]
* Please see your service provider for details and availability .
10. Advanced À Ç System ¼ ³ Á ¤
10.1 Field Service [ Menu + 7 + 0 + 000000 + 1 ] ]
* Used for the call test of the PHONE, check of the phone status, verification of the error list and the
deletion of the error list.
10.1.1 Screen [Menu +7+0 + 000000 +1 + 1]
* As the function capable of checking the status of the phone, this performs to verify the status of the
current reception task, RX AGC VALUE, TX GAIN, PN OFFSET and PILOT ACTIVE.
l
Select ' Menu + 0 + 000000 + 3 + 1'
¢ Ñ First LINE
1 ~ 3 : PN OFFSET / 5 : Status of Reception TASK / 7 ~ 8 : RX AGC VALUE
¢ Ñ Second LINE
1 : No meaning / 3 : Status of PILOT ACTIVE
10.1.2 Test Call [Menu +7+ 0 + 000000 + 1 + 2 ]
* It can make test of 8K / 13K Markov and loopback.
l
Select ' Menu + 7+0 + 000000 + 1 + 2'
l
Select one of OLD8K Markov / NEW8K Markov / 8K loopback / NEW13K Markov / 13K
loopbacks using center soft key and press SAVE key. You can verify the call operation under the
selected status.
10.1.3 CDMA Only [Menu+7+0+000000+1+3].
/ 7 ~ 8 : TX GAIN VALUE
Terminal Development Center
10
Advertisement
