Schlage LT Series Installation Instructions Manual page 4

10f Fully tighten the latch faceplate screws.
f
Customer Service
1-877-671-7011 www.allegion.com/us
If desired, reverse bushing aperture position
1. Disassemble the inside and outside trim
assemblies (levers, roses, mounting
plates and spring cages).
2. Rotate the inside and outside mounting
plates 180°.
Bushing
aperture
Rotate 180°
3. Reassemble the interior and exterior trim assemblies.
Disassemble
© Allegion 2014
Printed in U.S.A.
P516-769 Rev. 04/14-b