Table of Contents
Advertisement
3.3
Breather filter hole precautions
Observe the following breather filter hole precautions to ensure full functionality and prevent possible damage
to the drive.
Figure 3
Breather filter hole location
Caution: Do not cover, seal, or insert any object into this hole.
This hole has two purposes:
• To allow condensation inside the hard disc to escape
• To allow air pressure inside the hard disc to equalize with ambient pressure
Note.
If this hole is covered, sealed, or penetrated by any object, drive reliability may be compromised
and could lead to permanent damage. Covering or sealing this hole voids the warranty.
LD25 Series 5400.2 Product Manual, Rev. C
Breather filter hole
Do not cover, seal,
or put any object in
this hole.
21
Advertisement
Table of Contents
