Physical Characteristics; Connector Requirements; Electrical Description; Pin Descriptions - Seagate SAVVIO 10K.2 SAS ST973402SS Product Manual

9.4.2

Physical characteristics

This section defines physical interface connector.
9.4.3

Connector requirements

Contact your preferred connector manufacturer for mating part information. Part numbers for SAS connectors
will be provided in a future revision of this publication when production parts are available from major connec-
tor manufacturers.
The SAS device connector is illustrated in Figures 12 and 13.
9.4.4

Electrical description

SAS drives use the device connector for:
• DC power
• SAS interface
• Activity LED
This connector is designed to either plug directly into a backpanel or accept cables.
9.4.5

Pin descriptions

This section provides a pin-out of the SAS device and a description of the functions provided by the pins.
Table 23: SAS pin descriptions
Pin Signal name
S1 Port A Ground
S2* +Port A_in
S3* -Port A_in
S4 Port A Ground
S5* -Port A_out
S6* +Port A_out
S7 Port A Ground
S8 Port B Ground
S9* +Port B_in
S10* -Port B_in
S11 Port A Ground
S12* -Port B_out
S13* +Port B_out
S14 Port B Ground
* - Short pin to support hot plugging
Savvio 10K.2 SAS Product Manual, Rev. B
Signal type
Diff. input pair
Diff output pair
Diff. input pair
Diff output pair
Pin Signal name
P1* NC (reserved 3.3Volts)
P2* NC (reserved 3.3Volts)
P3 NC (reserved 3.3Volts)
P4 Ground
P5 Ground
P6 Ground
P7 5 Volts charge
P8* 5 Volts
P9* 5 Volts
P10 Ground
P11* Ready LED
P12 Ground
P13 12 Volts charge
P14* 12 Volts
P15* 12 Volts
Signal type
Open collector out
59