Safety Symbols; General Safety Rules; Work Area Safety; Electrical Safety - RIDGID SeekTech ST-305 Operator's Manual

Safety Symbols

In this operator's manual and on the product, safety symbols and signal words are used to communicate important safety
information� This section is provided to improve understanding of these signal words and symbols�
This is the safety alert symbol� It is used to alert you to potential personal injury hazards� Obey all safety messages that follow
this symbol to avoid possible injury or death�
DANGER
WARNING
CAUTION
NOTICE
This symbol means read the operator's manual carefully before using the equipment� The operator's manual contains important
information on the safe and proper operation of the equipment�
This symbol means always wear safety glasses with side shields or goggles when handling or using this equipment to reduce
the risk of eye injury�
This symbol indicates the risk of electrical shock�

General Safety Rules

Read all safety warnings and instructions. Failure to fol-
low the warnings and instructions may result in electric
shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS!

Work Area Safety

•
Keep your work area clean and well lit� Cluttered or dark
areas invite accidents�
•
Do not operate equipment in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust� Equipment can create sparks which may ignite the
dust or fumes�
•
Keep children and bystanders away while operating
equipment� Distractions can cause you to lose control�
•
Avoid traffic� Pay close attention to moving vehicles when
using on or near roadways� Wear visible clothing or reflec-
tor vests�

Electrical Safety

•
Avoid body contact with earthed or grounded surfac-
es such as pipes, radiators, ranges, and refrigerators�
There is an increased risk of electrical shock if your body is
earthed or grounded�
•
Do not expose equipment to rain or wet conditions�
Water entering equipment will increase the risk of electri-
cal shock�
•
Do not abuse the cord� Never use the cord for carrying,
pulling, or unplugging the power tool� Keep cord away from
heat, oil, sharp edges, and moving parts� Damaged or en-
tangled cords increase the risk of electric shock�
•
If operating equipment in a damp location is unavoid-
able, use a ground fault circuit interrupter protected
supply to reduce the risk of electric shock�
Find Quality Products Online at:
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury�
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury�
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury�
NOTICE indicates information that relates to the protection of property�
WARNING
GlobalTestSupply
www.
SeekTech ST-305
•
Keep all electrical connections dry and off the ground�
Do not touch equipment or plugs with wet hands to reduce
the risk of electrical shock�

Personal Safety

•
Stay alert, watch what you are doing, and use common
sense when operating equipment� Do not use equipment
while you are tired or under the influence of drugs, alco-
hol, or medication� A moment of inattention while operating
equipment may result in serious personal injury�
•
Use personal protective equipment� Always wear eye
protection� The appropriate use of protective equipment
such as a dust mask, non-skid safety shoes, a hard hat,
and hearing protection will reduce personal injuries�
•
Do not overreach� Keep proper footing and balance at all
times� This enables better control of the equipment in unex-
pected situations�
•
Dress properly� Do not wear loose clothing or jewelry�
Keep your hair, clothing, and gloves away from moving
parts� Loose clothes, jewelry, and long hair can be caught
in moving parts�

Equipment Use and Care

•
Do not force equipment� Use the correct equipment for
your application� The correct equipment will do the job
better and safer at the rate for which it is designed�
•
Do not use equipment if the power switch does not turn
it ON and OFF� Any equipment that cannot be controlled
with the power switch is dangerous and must be repaired�
•
Disconnect the plug from the power source and/or the
battery pack from the equipment before making ad-
justments, changing accessories, or storing� Preventive
safety measures reduce the risk of injury�
•
Store idle equipment out of the reach of children and
do not allow persons unfamiliar with the equipment or
.com
sales@GlobalTestSupply.com
English – 3