Regulatory Statements; Safety Symbols - RIDGID SeekTech ST-305R Operator's Manual

Introduction
The warnings, cautions, and in-
structions discussed in this opera-
tor's manual cannot cover all possi-
ble conditions and situations which
may occur. It must be understood
by the operator that common sense
and caution are factors that cannot
be built into this product, but must
be supplied by the operator.

Regulatory Statements

The EC Declaration of Conformity
(890-011-320.10) will accompany
this manual as a separate booklet
when required.
This device complies with Part 15
of FCC rules. Operation is subject
to the following two conditions:
(1) This device may not cause
harmful interference, and (2) this
device must accept any interfer-
ence received, including interfer-
ence that may cause undesired
operation.

Safety Symbols

In this operator's manual and on the prod-
uct, safety symbols and signal words are
used to communicate important safety infor-
mation. This section is provided to improve
understanding of these signal words and
symbols.
This is the safety alert symbol. It
is used to alert you to potential
personal injury hazards. Obey all
safety messages that follow this
symbol to avoid possible injury or
death.
DANGER
DANGER indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING
WARNING indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
CAUTION
CAUTION indicates a hazardous situation
which, if not avoided, could result in minor
or moderate injury.
NOTICE indicates informa-
NOTICE
tion that relates to the pro-
tection of property.
This symbol means read the oper-
ator's manual carefully before
using the equipment. The manual
contains important information on
the safe and proper operation of
the equipment.
This symbol means always wear
safety glasses with side shields or
goggles when handling or using
this equipment to reduce the risk
of eye injury.
This symbol indicates the risk of
electrical shock.
ST-305/R – English – 3