Install The Rubber Pad; Play From An External Device - Philips DC390 User Manual

To pause/resume play, press OK/
•
• To skip to a track, press / .
• To search during play, press and
hold / , then release to resume
normal play.
• To go back to the previous iPod/
iPhone menu, press MENU.
• To scroll through the menu, press
/ .
• To confirm a selection, press OK/
.
» If no key is pressed for more than
10 seconds, OK/
the play/pause key.

Install the rubber pad

If necessary, install the supplied rubber pad to
keep the iPad/iPad 2 stable before you place
the iPad/iPad 2.
Charge the iPod/iPhone/iPad
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
.
•
•

Play from an external device

You can also listen to an external audio device
acts back as
through this unit.
1
2
3
Tip
For certain iPod models, it may take up to a
minute before the charging indication appears.
If clock is not manually set, when iPod/iPhone/
iPad is connected, the clock radio synchronizes
time from the iPod/iPhone/iPad automatically.
Press MP3 LINK to select the MP3 link
source.
Connect the supplied MP3 link cable to:
• the MP3 LINK jack (3.5mm) on the
back of the unit.
• the headphone jack on an external
device.
Start to play the device (see the device
user manual).
EN
13