Table of Contents
Advertisement
62
Pin 1
(check your
adapter for Pin 1 location)
[1]
Closed end type 50-pin connector used. Terminators enabled.
[2]
Open end type (in-line application) connector used. Terminators disabled.
[3]
Host need not be on the end of the daisy-chain. Another device can be on the end with the terminator, the
host having no terminator.
[4]
Total interface cable length must not exceed that specified in ANSI document X3T10/1302D (including
host adapter/initiator). The cable length restriction limits the total number of devices allowed.
[5]
SCSI ID7 has highest arbitration priority, ID0 has lowest arbitration priority.
[6]
Last drive on the daisy chain.
Figure 19.
SCSI daisy chain interface cabling for N drives
SCSI ID 7 [5]
[1]
Host
Adapter
PCB
[3]
Barracuda 36ES2 Product Manual, Rev. B
'N' Model
Drive
[1]
2 through X
SCSI devices [4]
SCSI ID 0
[2]
[6]
SCSI ID 1
Advertisement
Table of Contents
