Page 1
Model 38QHF025 700x240x540 38QHF036 / 38QHF050 810x310x558 38QHF060 845x320x700 38QHF065 / 38QHF080 900x315x860 The holes for fixing anchors should be 5mm. Indoor unit outline Left rear side refrigerant Right rear side φ pipe hole refrigerant pipe φ hole 42QHF025 :(A:800, B:275, C:100, D:95)
Wire cross section is depending on the rated (max) current which is indicated as below: Do not put drain end into water Model Rated (max) current of appliance (A) QHF025 / QHF036 11.5 QHF050 12.5 QHF060 / QHF065 14.5 QHF080 16.0 1.Lift the indoor unit front panel.