Zanussi ZWF 81440W User Manual page 18

Water supply pressure
1)
2)
Water supply
Maximum Load
Energy Efficiency Class
Spin Speed
1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your do-
mestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.
2) Connect the water inlet hose to a water tap with a 3/4'' thread.
PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION
1369/2017
Trade Mark
Model
Rated capacity in kg
Energy efficiency class
Energy consumption in kWh per year, based on 220 standard wash-
ing cycles for cotton programmes at 60 °C and 40 °C at full and
partial load, and the consumption of the low-power modes. Actual
energy consumption will depend on how the appliance is used.
Energy consumption of the standard 60°C cotton programme at full
load in kWh
Energy consumption of the standard 60°C cotton programme at par-
tial load in kWh
Energy consumption of the standard 40°C cotton programme at par-
tial load kWh
Power consumption of the off-mode in W
Power consumption in left-on mode in W
Water consumption in litres per year, based on 220 standard wash-
ing cycles for cotton programmes at 60 °C and 40 °C at full and
partial load. Actual water consumption will depend on how the appli-
ance is used.
Spin-drying efficiency class on a scale from G (least efficient) to A
(most efficient)
Maximum spin speed in rpm
Remaining moisture content in %
18
Minimum
Maximum
Cotton
Maximum spin speed
Product Information Sheet
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
Cold water
8 kg
A+++
1351 rpm
ZANUSSI
ZWF 81440W,
PNC914912005
8
A+++
190
0,96
0,73
0,62
0,48
0,48
9999
B
1351
52