Table of Contents
Advertisement
SKP3000.book Seite 53 Freitag, 16. April 2004 11:03 11
The frequencies are tunable in 5-kHz steps within a
switching bandwidth of 36 MHz max
Note:
When operating a multi-channel system, make sure to only
use frequencies that are intermodulation-free.
Adjusting the sensitivity – SENSIT
Via the "SENSIT" menu, you can adjust the transmitter's
input sensitivity.
The sensitivity is correctly adjusted when
the level display for audio signal "AF"
shows full deflection only during the
loudest passages.
For monitoring the adjusted sensitivity, the transmitter's level
display for audio signal "AF"
level – even if the transmitter is muted.
In order to be able to use highly sensitive directional condenser
microphones, the plug-on transmitter offers a sensitivity range
extended by 20 dB.
The following figures are a guide to the best settings
dynamic
microphones
Loud music/vocals
–30 to –20 dB
Presentations
–20 to –10 dB
Interviews
–10 to 0 dB
.
always indicates the audio
:
directional
condenser
microphones
–50 to –40 dB
–40 to –30 dB
–30 to –20 dB
53
Advertisement
Table of Contents
