Setting The Temperature; Switching A Compartment Off Or On - Dometic CFX95DZW Operating Manual

Operation
I
NOTE – Lid Open Alarm
If a lid is left open for three minutes or more and the device is switched
on, the respective interior light will flash until the lid is closed.
6.6

Setting the temperature

➤ Press the "SET" button (fig. 3 4, page 3):
– once for the large compartment
– twice for the small compartment
✓ The display of the respective compartment blinks.
➤ Use the "UP +" (fig. 3 10, page 3) and "DOWN –" (fig. 3 9, page 3) buttons
to select the cooling temperature.
You can adjust the cooling temperature so that each compartment works as a
refrigerator compartment or as a freezer compartment.
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
I
NOTE
The temperature of each compartment can be set to –22 °C (–8 °F). The
manufacturer however recommends a cooling temperature of –15 °C
(+5 °F) to –18 °C (0 °F) for normal usage and optimum energy consump-
tion.
6.7

Switching a compartment off or on

If only one compartment is required, the other compartment can be switched off to
save energy.
Switching off compartment
If the display of the compartment shows a temperature, you can switch off the
compartment as follows:
➤ Press the "SET" button (fig. 3 4, page 3):
– once for the large compartment
– twice for the small compartment
✓ The display of the respective compartment blinks.
➤ Press the "ON/OFF" button (fig. 3 1, page 3).
✓ "OFF" flashes for five seconds on the display of the respective cooling
compartment, then "OFF" is displayed.
18
CFX95DZW
EN