Starting Up; Unpacking The Monitor - Compaq QVision Graphics System Installation Manual

QVision Operations and Installation Guide
Chapter 2

STARTING UP

This chapter gives instructions for removing the monitor from its packing
material, connecting it to a COMPAQ personal computer, and using the
operating controls.

UNPACKING THE MONITOR



Never insert sharp instruments into the packing box while opening it.
The packing box contains the following items:
§
§
§
§
Save the original container and packing material for possible future use.
WARNING: The monitor weighs approximately forty-five
pounds. Use care when removing it from its packaging
material.
The monitor
The power cord
The signal cable
The QVision Graphics System from Compaq Installation and
Operations Guide.
2-1