Stiga 520 DP Instruction Manual page 44

EN
Problem
If any of the faults listed below occurs, replace the relevant fuse (22)
9 The engine does not start or
starts and stops immediately
The battery is charged
10 Electrical cutting height
adjustment does not work
11 All electrical functions are
out of operation The battery
is charged
If problems persist after the operations above have been performed, contact your dealer.
Warning! Never attempt to carry out complicated repairs without the necessary tools or
technical ability Any poorly performed interventions will automatically nullify the warranty
and exonerate the manufacturer from all liability
28
ENGLISH
Probable cause
Fuse 10A blown.
Fuse 20A blown.
Fuse 30A blown.
(Translation of the Original Instructions)
Remedy
Replace fuse 10A.
Replace fuse 20A.
Replace fuse 30A.