Self-Clean; Cooling Fan - Bosch 800 series Service Manual

58300000202443_ARA_EN_C
4.3

Self-clean

In a double oven, if Self-clean is running in one cavity, the second
cavity will be disabled until the cycle finishes.
4.4

Cooling Fan

The cooling fan will operate during any cooking mode and is used to
maintain allowable temperatures on internal components and
customer-accessible surfaces.
During Preheat, the fan speed will increase based on cavity
temperature until the final speed is reached at the conclusion of
Preheat. Throughout the Regulate phase of the cooking cycle, the fan
speed will remain constant.
During Self-clean, the cooling fan will run at high speed immediately
after the self-clean cycle begins, regardless of temperature. The fan
will remain at this speed for the entire self-clean cycle.
When any of the following errors occur, the cooling fan will operate at
100% until the error is cleared: E101/E201, E002/E302, E303,
E104/E204. See the Error Code Table for more information about
these error codes.
The cooling fan will run until the cavity temperature is cooler than
350 °F (175°C) and will continue to operate after any cooking mode is
completed and the oven is OFF, for 5 minutes, even if the cavity
temperature did not reach 350 °F (175°C).
Copyright by BSH Home Appliances Corporation
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
JANUARY 2018
1901 Main St ▪ Suite 600 ▪ Irvine, CA 92614
Service Manual for Bosch 800 Series Built-in Wall Ovens
Page 12 of 43
800 944-2904