CHECK WITH TEST MODE
1. Operation Spec
When the following conditions are satisfied at its starting
state, error information is displayed.
Starting method (µcom version display mode):
Press the "SELECT/ENTER" button and hold it in for at
least 3 seconds, while simultaneously pressing the
"MODE" button and the "TUNER 1" button.
Then, "SELECT/ENTER" JOG is turned clockwise and
the following information is displayed on FL Display.
2. Display Order
Destination information → Main-µcom version information
→ Sub-µcom version information → Ethernet information
MODE TUNER 1
15
TU-604CI
テストモードによるチェック方法
1. 動作仕様
起動状態にて下記の条件に該当した場合は、バージョン
情報を表示します。
起動方法 ( マイコンバージョン表示モード ):
"MODE" ボタンと "TUNER 1" ボタンを同時に押しなが
ら、"SELECT/ENTER" ボタンを 3 秒以上押します。
その後、"SELECT/ENTER" JOG を右にまわすと内容を FL
Display に表示します。
2. 表示順序
仕向地表示 → メインマイコンバージョン情報 → サブマ
イコンバージョン情報 → イーサネット情報
SELECT / ENTER