Table of Contents
Advertisement
Cautions for installing flex hoses
●You have to bend the hoses, but be careful not to break them.
The minimum bending radius of the hose is 2 3/8"(60mm), if you bend it over the limit,
it will break, which may cause early damage.
●During installation, do not bend the hose from the end surface of the main faucet
body too far.
●Do not pull the hose violently.
This may break the hose.
●Avoid unnecessary contact of similar hoses.
If the external reinforced layer of the hose is damaged due to friction, the hose
performance will deteriorate.
Hot water
supply hose
R=2 3/8"(60mm)
and higher
Good
R= 2 3/8" (60mm)
and higher
Cold water
flex hose
Bad
Bad
Bad
8
Advertisement
Table of Contents
