Table of Contents
Advertisement
english / USA
4
3
:
Set the choke lever (3):
For cold start to g
For warm start to e
:
Press the fuel pump bulb (4) at least
five times.
16
:
Put the machine on the ground.
Check that bystanders are well clear
of the general work area and the
nozzle.
:
Make sure you have a firm footing:
Hold the machine firmly with your
left hand on the handle and put one
foot against the base to prevent it
slipping.
:
Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope all
the way – it might otherwise break.
:
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
3
If engine is cold:
(choke lever on g
g )
g
g
:
Pull the starter rope 5 times.
:
Move choke lever (3) to e
:
Continue cranking until the engine
runs.
BR 45
Advertisement
Table of Contents
