Mitsubishi MELSEC iQ-F series User Manual page 153

Part names
No. Name
[1] Input display LED, output display LED
[2] POWER LED
[3] Pullout tab
[4] Extension cable
[5] Extension connector
Input/output module
■Extension connector type
[1]
External dimensions
Model
FX5-C32ET/D, FX5-C32ET/DSS
Part names
No. Name
[1] Extension connector
[2] PWR LED
[3] I/O display LED
[4] Input connector
[5] Output connector
[6] DISP switch
[7] Extension connector
Description
Lit when input or output is on.
Indicates whether the input modules/output modules are powered or not.
Lit: Powered
Off: Not powered or hardware error
Tab for pulling out an extension cable.
Cable used to connect the extension module.
Connector for connecting the extension cable of an extension module
13
W
[2]
[3]
[4]
[5]
[6]
W: mm
20.1
Description
Connector connected to extend modules
Indicates whether the input/output modules are powered or not.
Lit: Powered
Off: Not powered or hardware error
Lit when input or output is on.
Connector for connecting input signal cables.
Connector for connecting output signal cables.
Switches input/output of the I/O display LED.
Input: IN
Output: OUT
Connector for connecting the extension connector of an extension module
Unit: mm
74
[7]
Appendix 4 I/O Module
A
APPX
151