Table of Contents
Advertisement
Settings & Preferences – Overview
How To Use Preferences
To access the Preferences menu, press and hold both the SEN and MUTE buttons. ESCORT iX Ci will
display "Prefs," indicating that it is in program mode.
Once in Preferences mode, the SEN button is used to review the preference categories, and the Up and Down
buttons are used to change the individual settings within the selected category.
To exit the Preferences menu, press the power button or simply wait a few seconds without pressing any
button. A "Complete" message will display, confirming your selection(s).
Press SEN to go from
one category to the next
Pilot Mode
PilotSPD*
PilotHWY
Pilot H
Pilot H>-
Pilot V
sAlrt ON*
Speed Alert
sAlrt OFF
Cruise Alert
Cruse 20*
OFF/20-160
Meter STD*
Meter Mode
Meter EXP
Meter SPC
Alert Tones
TonesSTD*
TonesSTD+
TonesMLD
AutoMute
aMute LOW/MED*/HI
aMuteOFF
AutoLearn
aLrn ON*
aLrn OFF
Units
Units ENG*
Units MET
Language
LangENG*
LangSPA
Voice
Voice ON*
VoiceOFF
GPS ON*
GPS Filter
GPS OFF
Press Up or Down to change
your setting within a category
Speed limit (when connected to ESCORT Live app), sensitivity mode,
and vehicle speed
Full word: Highway, Auto, AutoNoX, or AutoLoK
Letter: H, A, ANX, ALK
Letter with scanning bar
Vehicle voltage
Speed Alert On
Speed Alert Off
Offers double-beep alert tone when traveling below specified
speed (mph if Units ENG is selected, kph if Units MET is selected)
Standard Bar-graph Meter Mode
ExpertMeter Mode
SpecDisplay Meter Mode
Standard ESCORT alert tones
Standard ESCORT alert tones for primary alert and double-beep for
additional alerts
Mild doorbell chime alert tones
Automatically reduces audio to selected volume during alert
AutoMute Off
AutoLearn On
AutoPower Off
English Units
Metric Units
English language for voice and text
Spanish language for voice and text
Voice alerts on
Voice alerts off
GPS-powered filtering is on
GPS-powered filtering is off
6
aPwr OFF
AutoPower
When installed to a switched power supply, powers off with the vehicle's ignition
aPwr 1HR
Powers off automatically after 1 hour
aPwr 2HR
Powers off automatically after 2 hours
aPwr 4HR*
Powers off automatically after 4 hours
aPwr 8HR
Powers off automatically after 8 hours
Band Enables
Bands DFT*
Factory Default Settings
Bands MOD
Factory Default Settings Modified
Press MUTE to go from
Press Up or Down to change your setting within a category
one category to the next
X Band
X
ON* or OFF
K Band
KSW
ON* or OFF Freq: 24.050-24.250 GHz
NOTE: Turn off K band to select separate narrow segments of the band to turn on or off.
KN1
ON* or OFF Freq: 24.050 - 24.110 GHz
KN3
ON* or OFF Freq: 24.175 - 24.250 GHz
KaSW
Ka Band
ON* or OFF Freq: 33.400-36.000 GHz
NOTE: Turn off Ka band to select separate narrow segments of the band to turn on or off.
KaN1
ON* or OFF Freq: 33.400 - 33.700 GHz
KaN3
ON* or OFF Freq: 33.900 - 34.200 GHz
KaN5
ON* or OFF Freq: 34.600 - 34.800 GHz
KaN7
ON* or OFF Freq: 35.160 - 35.400 GHz
KaN9
ON* or OFF Freq: 35.600 - 35.840 GHz
POP
Ka POP
ON or OFF*
Laser
LSR
ON* or OFF
TSR
TSR
ON* or OFF Traffic Sensor Rejection
RDR
RDR
ON* or OFF Radar Detector Rejection
Shifters
ShftSHFT
Laser Shifting On
ShftRECV*
Laser Receive-only, shifting disabled
Shft OFF
Laser sensors disabled
Mark DFT*
Marker Enables
Factory Default settings
Mark MOD
Factory Default Settings Modified
Press MUTE to go from
Press Up or Down to change your
one category to the next
setting within a category
Other
Other
ON* or OFF
Redlight Camera
rLCam
ON* or OFF
Redlight & Speed Camera
rLSpd
ON* or OFF
Speed Camera
spCam
ON* or OFF
sTrap
Speed Trap
ON* or OFF
Air Patrol
aPtrl
ON or OFF*
ClearMRK
Clear Locations
Clear all user-marked locations. Press MUTE button to confirm
ClearLCK
Clear all lockouts. Press MUTE button to confirm
ClearDEF
Clear all DEFENDER Database data. Press MUTE button to confirm
ClearFMT
Clear DEFENDER Database, all markers, and all lockouts. Press MUTE button to confirm
*Default Setting
Notes for Settings & Preferences
To view serial number and software revision press MRK and SEN while powering on detector.
To restore ESCORT IX Ci to its original factory settings, press and hold MRK and BRT while turning the power on.
A
Restored
message will display, acknowledging the reset.
KN2
ON* or OFF Freq: 24.110 - 24.175 GHz
KN4
ON or OFF* Freq: 23.950 - 24.050 GHz
KaN2
ON* or OFF Freq: 33.700 - 33.900 GHz
KaN4
ON* or OFF Freq: 34.200 - 34.600 GHz
KaN6
ON* or OFF Freq: 34.800 - 35.160 GHz
KaN8
ON* or OFF Freq: 35.400 - 35.600 GHz
KaN10
ON* or OFF Freq: 35.840 - 36.000 GHz
NOTE: User cannot mark an Air Patrol location
7
Advertisement
Table of Contents
