Part 4 - Piping - Westinghouse WGR050NG076 Installation, Start-Up, Maintenance, Parts, Warranty

Figure 3 - Water Heater Dimensions - NOTE: All Dimensions Are Approximate
BTU/Hr Efficiency (°F)
(°C)
GPH
76,000 97%
LPH
Table 3 - Recovery on Rating Plate is based at 97% Thermal Efficiency at 70

Part 4 - Piping

Failure to follow the instructions in this section WILL VOID the
warranty and may result in property damage, severe personal
injury, or death.
DO NOT pipe this water heater with black iron, galvanized steel,
steel, or lead pipe. Doing so will result in premature product failure
and property damage, and WILL VOID the warranty.
Performance Specifications for High Efficiency Gas Water Heater Models
Temperature Rise in Degrees Fahrenheit (F) and Celsius (C)
40 50 60
22 28 33
231 187 158
874 708 598
70 80 90
39 44 50
135 119 107
511 450 405
o
Fahrenheit rise, as required by ANSI
Do not apply heat to the Hot or Cold water heater connections. If
sweat connections are used, sweat tubing to the adapter before
fitting adapter to the water connections on the heater. Any heat
applied to the water heater connections will permanently damage
the dip tube and/or heat traps. Damages due to improper installation
practices ARE NOT covered by warranty.
WHL-001 Rev. 001 Rel. 008 Date 8.23.18
100 110 120 130
56 61 67 72
97 86 79 73
367 326 299 276
11
140
78
69
261