Using Your New Tv; Getting Started; Step 1: Connect The Antenna - Sony TRINITRON KV-XA34 Operating Instructions Manual

Using Your New TV

Getting Started

Step 1
Connect the antenna
If you wish4Ho connect a VCR, see the Connecting a VCR diagram below.
or
Antenna cable (not supplied)
Connecting a VCR
To watch the video input, press t (see page 10).
To antenna
output
AUDIO
R
VIDEO IN
VIDEO OUT
To video and
audio outputs
4
Using Your New TV
CAUTION
• Do not plug in the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
Antenna cable (not supplied)
IEC connector
(not supplied)
Antenna cable (not supplied)
VCR
VIDEO
S video cable
L
(not supplied)
To S video
output
Audio/Video cable
(not supplied)
Rear of TV
To 8
(antenna)
To
(S video input)
(yellow)
-L (MONO) (white)
-R (red)
Rear of TV
: Signal flow
R L Y C C
B R
1 2 3
To t 1, 2 or 3
(video input)
: Signal flow