Position 0: The appliance is
switched off. Electric tool is sup-
plied with voltage.
Working with electrical power
tools
Adapt the adapter to the connection
diameter of the electric tool using a
knife if necessary.
Plug the enclosed adapter onto the
handle of the suction hose and con-
nect the electric tool with the con-
nection.
1.
3.
2.
Connect the mains plug of the elec-
tric power tool to the vacuum clean-
er.
A
Switch the appliance on (move the
rotary switch to the left to position
MAX) and start working.
Note: As soon as the electric tool is
switched on, the suction turbine starts
with a 0.5 second delay. If the electric
tool is switched off, the suction turbine
continues to run for approx. 5 seconds
in order to vacuum up the remaining
dirt in the suction hose.
1.
2.
English 11