Sanyo SRT-4040 Instruction Manual page 53

NB4QR/NA (SRT-4040 GB) Tue. Sept., 10/2002
SPECIFICATIONS
Other Specifications
Operating temperature range
Operating humidity range
Power requirements (SRT-4040 only)
Power requirements (SRT-4040DC only)
Power consumption (SRT-4040 only)
Power consumption (SRT-4040DC only)
Dimensions (W x H x D)
Weight
Connectors (When the "TERMINAL SET" is set to "SET2")
NOTES:
œ The terminal names and signals are different from the usual setting.
œ Names in brackets apply to terminals on the rear panel.
Clock set input (CONTROL IN)
Clock set output (CONTROL OUT)
Eject input (SERIES IN)
Eject output (TIMER OUT)
NOTE:
The specifications and external appearance of this unit are subject to change without notice.
5°C to 40°C (41°F to 104°F)
80% or less
120V AC,60Hz
12–24V DC
14 W
16 W
240 mm x 96.5 mm x 335 mm (9.45 x 3.8 x 13.19 )
approximately 3.6 kg
No voltage, make-contact switch input (Low input 100ms or more,
Normally 5 V)
DC 5 V, 5.7k , (Low output)
No voltage, make-contact switch input (Low input 100ms or more,
Normally 5 V)
DC 5 V, 5.7k , (Low output)
52
English