Starting The Mixer (Multi-Phase Program) - Firex CUCIMAX CBTG180A User Manual

USING THE MIXER 02-CBT.A-TOUCH-01-EN
18.3

STARTING THE MIXER (MULTI-PHASE PROGRAM)

If the selected program involves the operation of the mixer, after pressing the START key, a message will
appear with a countdown for mixer start up.
If you do NOT want to start the mixer, press the "STOP MIXER" key. If you do want to use it, simple wait
for the time to run out.
Attention:
This message will appear in the program every time there is a phase with NO active mixer,
followed by a phase with active mixer.
To change the mixing type and speed refer to the "MIXER SETTINGS" paragraph.
The changes made will NOT be saved in the program, and will only be valid for the phase currently
running!
Whenever the mixer is turned off voluntarily, the key flashes to indicate that the mixer is required for that
phase.
Attention: if during the current phase (where the program involves the mixer) you manually decide
not to choose any type of mixing (all 3 buttons light grey), the key does NOT flash!
Attention:
When opening the lid (PRI..M) the mixer automatically operates at minimum speed and only
rotates clockwise. When the lid is closed, the mixer returns to the set values.
When the pan is tilted, the mixer stops automatically. To facilitate product unloading, the mixer
can be operated (only at minimum speed and in a clockwise rotation) by keeping the key pressed
When the pan returns to the horizontal position, the mixer MUST be restarted!
55