Sanyo VCC-P7575P Pan-Focus Brochure & Specs page 3

nce and compatibility
environments
Installation, setup and operation
made easy by simple,
user-friendly design
Based on a development concept featuring
a pan-focus lens for the realization of ad-
vanced surveillance functions together with
enhanced operability and ease of installa-
tion. The VCC-P7575P and VCC-P7575PA
increase lens function and camera maneuv-
erability to simplify operation, save resour-
ces spent in installation and substantially
heighten the available degree of freedom.
On-screen setup and
adjustment after installation
Fine-tuning of zoom ratio and video
settings, etc. can be made while view-
ing a monitor screen when connected to
the VAC-70 controller (sold separately).
Saves labor during installation and allows a
flexible response to
changes arising after
operation has been
initiated.
Video coaxial cable
VAC-70
Board options for even greater
functionality with the VCC-P7575PA
VA-50LAN
Network board
Expansion board for connection to a network
configured with VDC-DP7585P or VCC-
P7575PA. Enables networked operation of
cameras from a computer via a web browser
(Internet Explorer only).
Bundled with VA-SW3050LITE
(viewer software).
VA-50ST
SSP + Twisted pair board
Coaxial control: SSP/H-SSP/PELCO-C
RS485: SSP/PELCO-D
Twisted pair terminal (CAT5) for video signal:
NVT built-in UTP video
Easy interior access
and setup
The camera unit and bottom cover can
be detached very simply. Moreover, easy
attachment and detachment of the bottom
cover to and from the base plate for
installation to a ceiling or wall simplifies set-
up and camera angle adjustment at the
point of surveillance.
Backside
Ceiling
After fastening the base plate at the point of
surveillance, installation is completed by simply
snapping on the bottom cover and the camera unit.
Monitor
Network Recorder
VA-SW3050
Sold separately as optional
software.
Dedicated software for recording, playback
and monitoring of video feeds from a multi-
plicity of surveillance cameras.
Push
Easy
access
& setup
Specifications
Note: Images produced by the camera may differ slightly from those appearing here.
VCC-P7575PA
Easy
access
& setup
Bottom
cover
Base plate
AC or DC Power Source Operation
The VCC-P7575P and VCC-P7575PA can
operate on either 12 V DC (12–15V DC) or
24 V AC (50 Hz, and even at a tolerance of
10%). Switching to the correct mode
occurs automatically when power is
supplied.
Compression
JPEG
Picture resolution
720 x 286 / 640 x 480 / 360 x 286 / 180 x 143 pixels
Picture quality
5 levels (Basic, Normal, Enhanced, Fine, Super Fine)
Frame rate
Max. 25 IPS (720 x 286)
Network protocols
TCP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, UPnP
Number of simultaneous log-in users
Up to 16 users (admin: only by one person)
System requirements
Computer: IBM PC/AT and compatible machines
OS: Windows 2000 Professional SP4
®
Windows ® Home SP2 / Windows
CPU/Memory:
4 cameras connected CPU: Pentium
Memory: 512MB or more
5–16 cameras connected CPU: Pentium
Memory: 1GB or more
Interface: 100Base-TX
Display card: 1,024 x 768 pixels, more than 16,000,000
colors or 24-bit color, PCI Express graphics card or AGP
graphics card with support for hardware overlay
(Latest version of DirectX driver, DirectX9.0c, required)
®
® XP Professional SP2
® I 2.0GHz or higher
® I 3.0GHz or higher