Setting - Sanyo PLV-Z60 Owner's Manual

Setting

Setting
The Setting Menu allows you to set up other various functions described below.
1 Press the Point
press the Point
items.
2 Use the Point
ed
press the Point
3
Use the Point ed
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean,
or Japanese.
Advanced menu
When this function is "On," the Advanced menu in the Image
Level Adjustment can be selected. Press the Point
buttons to switch On/Off. See "Image Level Adjustment" on page
30 for details.
Menu position
This function is used to change the position of the On-Screen
Menu. Select Menu position and press the Point
The Menu position screen appears. Use he Point
to select the desired position and press the OK button.
Keystone
When the image is distorted vertically, select Keystone and press
the Point 8 or OK buttons. The On-Screen Menu disappears and
the Keystone dialog box appears. Use the Point
correct keystone distortion.
Press the Point e button to
reduce the upper width.
• The arrows are white when there is no correction.
• The arrows disappear at the maximum correction.
• The arrows in the direction of correction turns orange.
• The Keystone dialog box disappears when the Keystone
function is not operated for four (4) seconds.
✔
Note:
• If you press the RESET button on the remote control while the Keystone dialog box
is displayed, the adjustment will go back to the factory default setting.
36
buttons to select the Setting Menu and
ed
8 or OK buttons to access the submenu
buttons to select the desired item and
8 or OK buttons to access the selected item.
or OK buttons to adjust the setting.
8
ed7 8
ed
Press the Point d
reduce the lower width.
Setting Menu
Language
8 or OK
Press the Point
to display the Language Menu.
or OK buttons.
buttons
Choose a language and press
the OK or Point
The pointer moves to this
icon. Press the OK or Point
buttons again to activate it.
Menu position
buttons to
button to
or OK buttons
8
8 buttons.
8
Select Menu position
and press the Point 8
OK buttons. The Menu
position screen appears.
or