Slide Shutter; Cleaning The Projection Lens; Cleaning The Projector Cabinet - Sanyo PLC-XU111 Owner's Manual

Maintenance and Cleaning

Slide Shutter

Slide Shutter is provided to protect the surface of the lens Slide Shutter Lever
against scratches and dirt. When you are not using the
projector, close the Slide Shutter.
To open or close, use the Slide Shutter Lever on the top of
the cabinet.
Do not close the shutter when the projection lamp is on.
Slide Shutter

Cleaning the Projection Lens

Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens cleaner,
or use a lens cleaning paper or commercially available air
blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the lens.

Cleaning the Projector Cabinet

Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry cleaning
cloth. When the cabinet is heavily soiled, use a small
amount of mild detergent and finish with a soft dry cleaning
cloth. Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the cabinet.
When the projector is not in use, put the projector in an
appropriate carrying case to protect it from dust and
scratches.
64