Filter Counter; Factory Default - Sanyo PLC-WXU30 Owner's Manual

Filter counter

This function is used to set a frequency for the filter cleaning.
When the projector reached a specified time between
cleanings, a Filter warning icon appears on the screen,
notifying the cleaning is necessary. After cleaning the filter,
be sure to select RESET and set the timer. The Filter warning
icon will not turn off until the filter counter is reset.
For details about resetting the timer, refer to "Resetting the
Filter Counter" on page 63.

Factory default

This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock, lamp counter, and
filter counter to the factory default settings.
Quit
Exit the Setting Menu.
Filter counter
Use the Point
to set the timer. Select
from (Off/100H/ 200H/
300H) depending on the
use environment.
Fig .3 Filter warning icon
Filter warning icon appears on the screen at a set
time.
Note:
✔
• This icon also appears at turning on..
Fig . Filter warning icon
Notes:
✔
• At selecting input source, the icon (Fig.4)
will appear..
• The Filter warning icons (Fig.3 and
Fig.4) will not appear when the Display
function is set to "Off" (p.48), during
"Freeze"(p.28), or "No show" (p.29).
Factory default
Select Factory default and this
box appears. Select [Yes], and
the next box appears.
Setting
buttons
7 8
Select [Yes] to
activate it.
57