Image Mode Selection - Sanyo PLC-WXU30 Owner's Manual

Computer Input

Image Mode Selection

Direct Operation
Select the desired image mode from among Dynamic,
Standard, Real, Blackboard (Green), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a
blackboard. This is mainly effective on a green colored board,
not truly effective on a black colored board.
Image 1–
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 37-38). This Image memory is
provided in each computer, component, and video input
source.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Image Select Menu icon.

Use the Point
ed
pointer to the desired image mode and then press the
SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
Blackboard(Green)
For the image projected on a blackboard. See above for
further description.
Image 1~
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 37-38).
36
buttons to move the red
7 8
buttons to move the red frame
Remote Control
IMAGE button
Image Select Menu icon
Image Select Menu
Move the red frame pointer to
the desired image mode and
press the SELECT button.
The selected image mode is check marked.
IMAGE button
Dynamic
Standard
Real
Blackboard (Green)
Image 1
Image 
Image 3
Image