Advertisement
STABILITRAK CONTROL
The StabiliTrak Stability Control System control button is located to
the left of the steering column on the instrument panel. Button
shown is with the optional power adjustable pedals. See also Ride
Control Systems in your Owner's Manual for an operation
description of the stability control system and related Driver
Information Center messages.
(See StabiliTrak page for description)
OnStar®
Voice Command Button
SOS
Blue OnStar® Button
SOS
Emergency Button
SOS
This vehicle is equipped with a comprehensive, in-vehicle system
that can connect to a live OnStar® Advisor for Emergency,
Security, Navigation, Connection, and Diagnostic Services.
OnStar® services may require a paid subscription. OnStar®
requires the vehicle battery and electrical system, cellular service,
and GPS satellite signals to be available and operating. OnStar®
acts as a link to existing public emergency service providers.
OnStar® may collect information about you and your vehicle,
including location information. See OnStar®'s Terms and
Conditions and Privacy Statement for more details including
system limitations at www.OnStar®.com (U.S.) or www.OnStar®.
ca (Canada). The OnStar® system status light is next to the
OnStar® buttons. If the status light is:
• Solid Green: System is on.
• Flashing Green: On a call.
• Red: Indicates a problem.
• Off: System is off. Press the blue OnStar® button twice to speak
with an OnStar® Advisor.
Press
or call 1-888-4-0NSTAR
SOS
(1-888-466-7827) to speak to an Advisor.
Press
to:
SOS
• Make a call, end a call, or answer an incoming call.
• Give OnStar® Hands-Free Calling voice commands.
NOTE: Do not activate OnStar® if you have no plans on using this feature
2019 TAHOE 4X4
SPECIAL SERVICE
STANDARD EQUIPMENT
SOS
SOS
PROXIMITY SENSORS
The parking assist displays proximity distance bars to nearby objects.
When an object is first detected in the rear, one beep will be heard from
the speakers.
A continuous beep will sound once object becomes very close.
REAR PARK ASSIST-AUDIBLE WARNING
WITH REAR VISION CAMERA
1. View Displayed by the Camera in Radio Screen
2. Corners of the Rear Bumper
Displayed images may be farther or closer than they appear. The area
displayed is limited and objects that are close to either corner of the bumper
or under the bumper do not display.
A warning triangle may display on the RVC screen to show where the RPA
has detected an object. This triangle changes from amber to red and
increases in size the closer the object.
Rear Parking Assist (RPA) uses sensors on the rear bumper to assist with
parking and avoiding objects while in R (Reverse). It operates at speeds less
than 5 mph (8 km/h). RPA may display a warning triangle on the Rear Vision
Camera screen and a graphic on the instrument cluster to provide the object
distance. In addition, multiple beeps may occur if very close to an object
The RVC displays a view of the area behind the vehicle, on the center stack
display, when the vehicle is shifted into R (Reverse).
WARNING: The camera(s) do not display children, pedestrians, bicyclists, crossing traffic, ani-
mals, or any other object outside of the cameras' field of view, below the bumper, or
under the vehicle. Shown distances may be different from actual distances. Do not drive or park
the vehicle using only these camera(s). Always check behind and around the vehicle before
driving. Failure to use proper care may result in injury, death, or vehicle damage.
22
1
2
2
Advertisement
