Picture - Sanyo LCD-19E30A Owner's Manual

MENU OPERATION (TV/AV mode)
1
Press MENU butto
buttons to select "PICTURE".
2
3
Press BACK button to return to the previous menu.
PICTURE MODE
• Select "Dynamic", "Standare", "Movie" pressing
Mode
Dynamic
Standard
Movie
Memory
Note:
• In the PC input mode this mode is not available.
Adjusting the Basic picture quality
1

"PICTURE".

2
Press
3
4
Selection
Contrast lower
Brightness darker
Color paler
Sharpness softer
Tint reddish
Note:
• The Tint may only be adjust on a tape which has been recorded
and played back on an NTSC VCR.
• In the PC input mode ( page
Color Temperature
You can change the tone of the picture by selecting from three
preset color temperatures: "Cool", "Normal" or "Warm".
1
press .
2
Cool: Lends a blue hue to the picture.
Normal: Neutral
Warm: Lends a red hue to the picture.
22
PICTURE
Picture quality
Bright and dynamic picture
Standard picture
Mild soft picture
Memory the picture quality you set
Pressing
higher
lighter
deeper
sharper
greenish
xx ) Sharpness mode is not available.
SCREEN MENU
DTV Menu...〔PICTURE〕
Picture Mode Auto Conrrast Enhancement On
Color Temp Picture Mode Dynamic
Aspect Ratio Contrast
Brightness
Backlight
Color
DNR
Sharpness
Tint
Confirm Return Navigate
OK MENU
DTV Menu...〔PICTURE... Picture Mode〕
Picture Mode Auto Conrrast Enhancement On
Color Temp Picture Mode Dynamic
Aspect Ratio Contrast
Brightness
Backlight
Color
DNR
Sharpness
Tint
Confirm Return Navigate
OK MENU
50
50
50
0
0
Cancel
BACK
50
50
50
0
0
Cancel
BACK