Controls And Jacks - Sanyo DP52848 Owner's Manual

GETTING STARTED—CONTROLS AND JACKS
RIGHT-SIDE
PANEL
Power
key
Volume
– + keys
Channel
ML keys
Œ
S-Video Input (VIDEO1), PAGE 8—To enhance
video detail use the S-Video jack instead of the
Video jack, if available on your external equip-
ment. (An S-Video connection will override a
connection to the Video1 input jack.)

Digital Audio Output, PAGE 10—Use a Phono-
Type (Coaxial) Digital Audio Out Cable to con-
nect Digital Audio Output to an advanced
stereo home theater system equipped with
Dolby® Digital 5.1.
Ž
Component Video Input (VIDEO2 or VIDEO3),
PAGE 8—Connect digital video equipment to
the Video Green (Y), Blue (Pb), Red (Pr) jacks,
and matching Audio White (L ) and Red (R)
jacks. These jacks will automatically detect
the type of signal being received.

Analog Audio Out (L/R) Jacks, PAGE 10—
Connect stereo audio equipment to these jacks.

Analog / Digital Antenna Input, PAGE 5—
Connect an RF antenna or Analog Cable sys-
tem to this jack.
6
Need help?
Visit our Web site at
www.sanyoctv.com
or Call
Œ

Ž


LEFT-SIDE PANEL
‘
AV Input (VIDEO1), PAGE 8—Connect analog
video equipment here.
’
HDMI Input (INPUT 1, 2, or 3), PAGE 10—An
all digital AV interface that accepts 1080p
uncompressed video signals for the very best
picture possible. HDMI supports HDCP copy
protection, allowing transmission of copy-
protected digital content. The signal can also
include Dolby ® Digital or PCM audio, when
available.
1-800-877-5032
‘
’