Sanyo DP42545 Service Manual page 18

MECHANICAL DISASSEMBLY (CONT.)
PANEL MODULE REMOVAL
1. Remove the key switch board.
2. Disconnect the following socket connections.
Main Board ~ Power Unit:
D-TU Board ~ Power Unit:
Filter Board ~ Power Unit:
Control Board ~ Main Board:
Speakers ~ Main Board:
PDP Module ~ Main Board:
3. Remove the main board, D-TU board, and filter board.
4. Remove the 16 screws from the panel holders (Mounting
Brackets) to take the panel module off.
(H:4X8, 14pcs; I:5X10, 2pcs)
CN8004, CN8007
CN8010
CN800
K8E
KSP8LR
K8L
— 18 —