Using The Remote Control - Sanyo CLT1554 Owner's Manual

Using the Remote Control

QuickTips
Be sure batteries are
■
installed correctly.
Point the remote
■
control toward the
TV. Objects between
the remote control
and the TV may
cause misoperation
of the remote control
function.
The "C" in front of
■
the number on your
screen indicates a
cable channel.
Adjusting the
■
volume level: Flash-
4
ing Right arrow
indicates volume is
increasing and Flash-
3
ing Left arrow
indicates volume is
decreasing.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
➀
Input Key—Press to select the program source to
watch: TV signal or signal from DVD or other equip-
ment you have connected to the A/V jacks.
➁
Menu Key—Use this key with the
to navigate and adjust features of the on-screen menu
system (see pages 11 ~ 13).
➂
Channel Scanning (CH
– /+) Keys—Press to scan through the channels in
memory and to adjust the volume.
➃
Mute Key—Press once to turn down the volume.
Press again to restore volume to previous level.
➄
Number Keys—Two keys must be pressed to select a
channel. Example: Press 0 then 6 to select channel 6. For
cable channels 100 through 125, press and hold the 1 key
until C1–– appears. Then press the other two numbers.
10
Remote Control
Point towards TV
POWER
➀
INPUT
➁
MENU
CH
VOL
➂
➃
MUTE
2
1
2
1
➄
4
4 5
5
7 7 8 8
➅
CAPTION
0 0
➆
V-GUIDE
▲/▼ and – /+ keys
▲/▼
) and Volume (VOL
➅
Caption Key—See page 13.
➆
V-Guide Key—See pages 14 ~ 15.
➇
➇
RESET
Reset Key—Press this key twice to restore
factory settings. The TV will automatically start
➈
RECALL
Channel Search and clear all customized settings.
➉ These features will automatically reset:
VOL
•
•
DISPLAY
11
•
3
3
•
6
6
9 9 •
•
SLEEP
12
•
•
•
If desired, personal settings can be made
again using the menu options.
➈
Power Key—Press to turn TV on or off.
➉
Recall Key—Select a channel; select another
channel using the number keys. Press
RECALL to switch between the channels.
11
Display Key—Press once to display the
Channel number. Press twice to display the
channel number continuously. Press again to
remove the display.
12 Sleep Key—Press this key then press the "0"
key to set the Sleep Timer. The desired time
can be set from 30 minutes up to 3 hours.
Sleep Timer will switch off the TV
automatically.
Note: The Sleep Timer cancels when the
TV is turned off or if a power failure occurs.
Picture Controls: Auto, Game, and Manual:
Color, Tint, Contrast, Brightness and
Sharpness
Sound Controls: Audio, Bass, Treble, and
Surround
Channel Controls: Antenna, CH. Search and
CH. Memory
Set Up Controls: Color Enhancer, Aspect
Ratio, and Backlight
Caption to OFF
V-Guide to OFF
Language to English
Sleep Timer (if previously set)
Video to TV (if previously set)